Lowest Prices, Highest Quality & Made in the USA Sales & Quantity Discounts: 877-762-2515 (24/7)Customer Service: 818-772-0518 (9am-5pm PST)
24/7 Sales-Quantity Discounts 877-762-2515
Service & Orders 818-772-0518

Light Pole, 4" Square, 11 Gauge Steel, 10 to 25 Foot Heights

Light Pole, 4" Square, 11 Gauge Steel, 10 to 25 Foot Heights

    Price: $449.99

    Code: DL411-1025


    SCROLL DOWN TO SEE ALL INFORMATION AND SPECIFICATIONS FOR THIS LIGHT POLE!
    SPECIFICATION SHEET (PDF):
    ANCHOR BOLT TEMPLATE - MUST BE PRINTED ON 11" x 17" (PDF):
    PRICE BUSTER!!! GREAT QUALITY FOR A GREAT PRICE! 100% USA MADE! TOP QUALITY!
    ***IMPORTANT! THESE POLES ARE AVAILABLE FOR WILL-CALL (PICKUP) OR DELIVERY WITHIN THE STATE OF CALIFORNIA ONLY!!!
    10, 15, 16, 20 or 25 Foot High, 4" x 4" Square Shaft, 11 Gauge Commercial Light Pole. 2-3/8" Diameter Tenon Mount adaptor is optional. Finished in Dark Bronze. Anchor Bolts are required, and must be ordered Anchor Bolts with this pole above when ordering, if needed. See above for all dimensions.
    ADDITIONAL SPECIFICATIONS FOR THESE COMMERCIAL LIGHTING POLES BELOW
    POLE SHAFT: Shaft fabricated from weldable grade hot rolled commercial quality carbon steel ASTM 500 Grade B tubing with minimum yield strength of 46,000 PSI. Shaft is furnished with ground lug inside pole, opposite hand hole opening.
    BASE PLATE: Steel plate base is ASTM-A36 hot rolled steel, meets or exceeds minimum yield strength of 36,000 PSI. The base is provided with a slotted anchor bolt opening that enables a range of bolt circles.
    BASE COVER: Fabricated from heavy gauge quality aluminum. Two-piece base cover completely conceals the entire base plate and anchorage.
    FINISH: Poles are sandblasted and cleaned then textured thermoset polyester powder coat is then applied to a minimum of 3-5 mils. Then oven baked at a temperature of 400 degrees Fahrenheit to insure exceptional adherence and finish hardness. Pole finish warrantied for a full two years.
    ANCHOR BOLTS: Uses required 100% galvanized anchor bolts, with double nuts and washers. Anchor bolts conform to ASTM-A36, meets or exceeds a minimum yield strength 36,000 PSI
    TENON MOUNT: This pole is available with a 2-3/8" Diameter Tenon Mount. The Tenon Mount allows for a single light head with slipfitter to be attached to the top, or you may use a Tenon Bullhorn (multi-head) Mount to mount multiple heads to the pole.
    Gauge: 11 Gauge.
    WALL THICKNESS: 1/8".
    close