24V 4.4 Watt / Ft RGB Color Changing, 16.4 Feet



In Stock


Product Description

  • SPOOL LENGTH: 16.4 Feet (5 Meters), 0.4″ Wide. Field cuttable every 4″ (every 6 LED’s).
  • INPUT VOLTAGE: 24 Volt DC Low Voltage allows for longer runs! 24VDC Transformer / Driver or low voltage DC power source is required and not included. For LED Drivers, please see our accessories tab above.
  • RGB COLOR-CHANGING CONTROL: Requires an RGB LED Controller for color-changing, fading, etc (not included). Can be connected to a DMX512 system using one of our DMX512 Decoders. We offer many RGB Controller options to suit your needs!
  • POWER CONSUMPTION: 72 Watts total for the entire 16.4 foot spool (Approximately 4.4 Watts Per Foot). Each spool pulls 3 Amps from the 24VDC power supply. Transformer not included, please see our accessories tab above for required transformer.
  • MAX RUN LENGTH: Up to 32.8 feet (2 spools). Longer runs will require additional power connections from your power source to the RGB LED Strip run, and you will need an RGB Signal Amplifier For runs longer than 32.8 feet. See our accessories section (link above).
  • # OF LED’S: 300 LED’s per 16.4 foot spool(Approximately 18 LED’s per foot).
  • LIGHT DISTRIBUTION: 120° Wide Flood beam angle offers a wide spread directional light that will not waste light shooting backwards from the source!
  • DIMMING: Fully Dimmable depending on the RGB Control system you are using. Please see our accessories tab (link above).
  • INSTALLATION & MOUNTING: Mounts just about anywhere utilizing durable long lasting Two Sided Tape on the back! No Mounting Channels or Clips needed, just peel it & stick! Optionally we do have mounting channels available if desired, please see the accessories tab.
  • LUMENS PER FOOT: 270 Lm/Foot when set to 6500K Daylight Cool White. Lumens will naturally vary depending on your RGB color settings.
  • USE: Indoor (standard), Outdoor (optional) or submersible (optional) is available. See options above.
  • WARRANTY: Three (3) year limited warranty from date of delivery. Warranty void if strip light is cut.

Bright, vivid and fully flexible SuperChip 24VDC 16.4 Foot Color-Changing RGB LED Strip Light Spool. Uses 4.4 Watts Per Foot or 72 Watts Per Spool. Our SuperChip Radiant Series 24V RGB LED Tape Light Strip is designed to change multiple colors and patterns (Flash, Strobe, Fade, Smooth, Dimming, etc.) using an RGB controller (required) and can change from many shades of Reds, Greens, Blues, and can even change to Cool White (6500K) if desired. You can run up to 32.8 Feet, or two (2) Spools on a single run. Requires a 24VDC LED Transformer (Driver) and an RGB LED Controller. Please see the link to our accessories section above.

Flexible and ultra-thin (only 0.1″ thick x 0.4″ Wide), and produces a even light. 24VDC allows for longer runs vs 12VDC. Field cuttable every 6 LED’s (about every 4″), which allows for installation flexibility and the ability to cover odd-sized areas. Long life span of at least 50,000 hours means you can install it and forget about it for many years! Installs easily using supplied 3M tape on the back. Simply peel it like tape and stick it wherever you want! We also offer mounting channel options for a more professional look, see the accessories tab. Produces no UV light making it perfect for UV sensitive areas such as artwork, etc. Also produces very little heat, making it perfect for heat-sensitive areas!

Decorative lighting (cove lighting, back lighting) for homes, hotels, stores, yachts, bars, automobiles etc.; Guidance Lighting for cinemas, theatres, yachts , trains to guide people; Channel letter lighting for your stores, restaurants, bars, etc… The possibilities are nearly endless!



Reviews (0)


There are no reviews yet.

Be the first to review “24V 4.4 Watt / Ft RGB Color Changing, 16.4 Feet”

Your email address will not be published. Required fields are marked *



MORE Customer Reviews

+ All Reviews
Customer Reviews