6 Foot Length Power Cord with Rectifier for Single Color 120V LED "Tape" Strip Light. Connects the end of the 120v "Tape" Strip Light to a 120v power receptacle. 5 Amp (600 Watt) Capacity (see specifications below for max runs on this Power Cord. Can be used for hard wiring to a switch, simply cut the end of the cord off! All 120v "Tape" Strip Light runs come with one (1) 5 Amp Capacity Power Cord. Order additional for any cuts you may make on your order (i.e. if you order 98 feet and want to make several runs, etc.). NOT for use with RGB 120V LED Tape "Strip" Light. Be sure to select whether you are using the 1.5 Watt, the 3.0 Watt or 4.5 Watt Single Color LED 120V Tape when ordering these power cord(s).
ADDITIONAL INFORMATION FOR THIS ACCESSORY BELOW
FOR: 120VAC Single Color LED "Tape" Strip Light. Make sure to select the correct wattage of the strip light you are using this for above when ordering. NOT for use with 120VAC RGB LED "Tape" Strip Light.
CORD LENGTH: 6 Feet Long (72")
MAX RUN LENGTH: This Power Cord is rated to up to 600 Watts (5 Amps). Exceeding this amount on this cord will cause the cord (and potentially the 120V LED Tape "Strip" Light) to fail and will void all warranties. Please see the max lengths below:
1.5 Watt per Foot 120V LED Tape "Strip": 400 Feet 3.0 Watt per Foot 120V LED Tape "Strip": 260 Feet 4.5 Watt per Foot 120V LED Tape "Strip": 130 Feet
LONGER RUNS: We have a special optional High Capacity 960 Watt Max (8 Amp) Power Cord with Rectifier available.
INSTALLATION: Connects to one end of the LED single color 120VAC Strip "Tape" Light, then simply plug it into an outlet or hardwire it to a switch by cutting off the plug-in end and splicing the wires.