CLICK HERE TO SEE THIS ADVANCED CONTROLLER ENLARGED EVEN MORE!
RGB LED Power Cord / Advanced RGB Controller with IR Remote for all 120V Line Voltage RGB Color-Changing LED "Tape" Strip Light. Connects the end of the 120v RGB "Tape" Strip Light to a 120V power receptacle. 4.58 Amp (550 Watt) Capacity. See specifications below for max runs on this RGB Power Cord / Controller. Can be used for hard wiring to a switch, simply cut the end of the power cord off! Our 120v RGB LED "Tape" Strip Light does NOT include any power cords / controllers, as we offer multiple options for RGB Control. NOT for use with Single Color 120V LED Tape "Strip" Light.
 |
This RGB LED Power Cord with Advanced IR Remote RGB Controller Powers the RGB 120V LED "Tape" Strip Light while offering an RGB Controller with IR Remote Control. With the RGB Controller, you can manually change 16 colors of Reds, Greens and Blues and allows you to choose a color, set the brightness, and to select from 12 modes: Flash, Strobe, Chasing, Fade, Smooth, etc. Create bright, dazzling color-changing effects! You can also set the color to stay on one color, as well as set it to Cool White (6500K)! Included IR Remote Control can control the RGB controller from up to 15 feet away if the control box is unimpeded. For our RF Remote Control, which will allow you to control the Controller from up to 130 feet away, Click Here!
|
| ADDITIONAL INFORMATION FOR THIS 120V LED TAPE RGB ACCESSORY BELOW |
 |
FOR: 120VAC RGB Color-Changing LED "Tape" Strip Light. Make sure to select the correct wattage of the strip light you are using this for above when ordering. NOT for use with 120VAC Single Color LED "Tape" Strip Light.
|
|
MAX RUN LENGTH: This Power Cord / Advanced RGB Controller with IR Remote is rated to up to 550 Watts (4.58 Amps). Exceeding this amount on this cord will cause the cord (and potentially the 120V RGB LED Tape "Strip" Light) to fail and will void all warranties. Please see the max lengths below:
3.0 Watt per Foot "Brighter" 120V RGB LED Tape "Strip": 250 Feet
4.5 Watt per Foot 120V "Brightest" RGB LED Tape "Strip": 125 Feet
|
|
|
INCLUDED IR REMOTE: Included IR Remote Controll can control the RGB control box from up to 15 feet away. We do offer this RGB Controller with an RF (Radio Frequency) remote control as well, which allows for remote operation from up to 130 feet away! Click Here to see / order this RF RGB Controller!
|
|
|
INSTALLATION: Connects to one end of the LED RGB Color-Changing 120VAC Strip "Tape" Light, then simply plug it into an outlet or hardwire it to a switch by cutting off the plug-in end and splicing the wires.
|
|
|
|
|
|
