ClickCease
Same Day Shipping Available - Lowest Prices, Highest Quality & Made in the USA Sales & Quantity Discounts: 877-762-2515 (24/7)Customer Service: 818-772-0518 (9am-5pm PST)
24/7 Sales-Quantity Discounts 877-762-2515
Service & Orders 818-772-0518

60 Watt Max 12VDC or 24VDC LED Electronic Indoor Transformer

60 Watt Max 12VDC or 24VDC LED Electronic Indoor Transformer

    Price: $32.99

    Code: SR-60WLED


    60 Watt Max 120VAC to 12VDC or 24VDC LED Electronic Low Voltage Transformer (Driver). Used to power low voltage LED lighting such as LED Tape Light. Can run up to 41 feet of 1.5 watt per foot LED tape light, 27 feet of 2.2 watt per foot LED tape light, or 13 feet of 4.4 watt per foot LED tape light. Includes male DC 2.1 jack on the secondary (low voltage) end that can be plugged directly into most LED tape light power connectors, or you can also cut the DC 2.1 jack end off, and splice the wires together. This LED low voltage DC transformer can also power up other low voltage LED lighting such as LED light bars, LED undercabinet lights, etc.
    This Electronic DC Transformer can be dimmed on the secondary side ONLY using our specialty in-line DC dimmers. If you wish to use a wall dimmer (such as Lutron, etc.) to dim the primary side, do not use this transformer! Please go back to see our Magnetic DC LED Transformers as they can be dimmed from the primary side with almost any Magnetic low voltage wall Transformer! As always, if you wish to dim your LED lighting, we always highly recommend using a Magnetic DC low voltage Transformer! 12 Volt DC output is Standard, 24 Volt DC output is optional.
    ADDITIONAL INFORMATION FOR THIS 12VDC OR 24VDC LED TRANSFORMER BELOW
    FOR: 12VDC or 24VDC low voltage LED lighting. Typically used for low voltage LED Tape Light.
    OUTPUT VOLTAGES AVAILABLE: 12VDC output is standard, 24VDC output is optional.
    MAX POWER LOAD: 5 Amps (60 Watts) for 12VDC, 2.5 Amps (60 Watts) for 24VDC.
    DIMENSIONS: 4.7" Length x 2.4" Width x 1.6" Thick
    MAX RUN LENGTH (TAPE LIGHT): Please see below:
    1.5 WATT / FOOT 12VDC OR 24VDC LED Tape Light: 41 feet of LED Tape Light
    2.2 WATT / FOOT 12VDC OR 24VDC LED Tape Light: 27 feet of LED Tape Light
    4.4 WATT / FOOT 12VDC OR 24VDC LED Tape Light: 13 feet of LED Tape Light
    INSTALLATION: Simply plug it into any standard 120VAC line voltage outlet, or you can also hard wire this transformer to a switch. Easily connects to LED Tape Light using the included DC 2.1 jack, or simply cut the jack end off and splice it in.
    USE: Indoor dry location rated only. If being used outdoors, this Transformer be sealed and shielded from moisture.
    WARRANTY: 3 Year Manufacturer's Warranty
    close