INFO AND SPECS FOR THIS LED PWM DIMMER SHOWN BELOW. |
 |
|
DIM UP TO 131 FEET OF SINGLE COLOR LED STRIP LIGHT WITH THIS DIMMER!*
In-Line PWM LED Strip Light Dimmer with 12-Key Remote and on/off functionality for Single Color LED Lighting. Not for use with RGB LED tape lighting or 120V LED lighting. Connects the end of our Low Voltage Standard (12V) or SuperChip (24V) Single Color LED Tape Light to a Low Voltage DC Transformer (will NOT work with AC transformers). Can be dimmed with either the rotary knob attached to the dimmer box or via the included 12-Key remote control. Connects to the secondary side of your LED Low Voltage DC Driver (Transformer).
 |
The included 12-Key Remote Control works up to 12 Feet away, and allows you to dim from 100% - 0% using the up and down buttons. It also has pre-set buttons set at 100%, 75%, 50% or 25%, as well as 4 DIY buttons (the 1, 2, 3 and 4 buttons) that allow you to preset custom dimming levels simply by dimming down to your desired level and holding one of these buttons for 3 seconds, and the remote will remember these settings the next time you hit the button! It also will turn your LED Tape Light on or off.
|
 |
|
ADDITIONAL INFORMATION FOR THIS LED PWM DIMMER BELOW |
 |
 |
MAX LED STRIP (TAPE) LIGHT LENGTHS: This LED PWM Dimmer can handle the max lengths of Single Color LED Strip Light as shown below. Please keep in mind that longer runs will require Signal Amplifier(s).
1.5 Watt Standard (12V) Single Color LED Tape Light: 65 feet (96W Max)
1.5 Watt SuperChip (24V) Single Color LED Tape Light: 131 feet (192W Max)
2.2 Watt Standard (12V) Single Color LED Tape Light: 43 feet (96W Max)
2.2 Watt SuperChip (24V) Single Color LED Tape Light: 87 feet (192W Max)
3.0 Watt Standard (12V) Single Color LED Tape Light: 32 feet (96W Max)
3.0 Watt SuperChip (24V) Single Color LED Tape Light: 65 feet (192W Max)
4.4 Watt Standard (12V) Single Color LED Tape Light: 21 feet (96W Max)
4.4 Watt SuperChip (24V) Single Color LED Tape Light: 43 feet (192W Max)
6.0 Watt SuperChip (24V) Single Color LED Tape Light: 32 feet (192W Max)
8.8 Watt Standard (12V) Single Color LED Tape Light: 10 feet (96W Max)
8.8 Watt SuperChip (24V) Single Color LED Tape Light: 21 feet (96W Max)
|
 |
 |
DIMENSIONS:
3.43" Length x 3.43" Width x 1.57" Depth (Thick) (LED Dimmer Box) 2.26" Length x 3.39" Length x 1.3" Width x 0.28 Depth (Thick) (Remote Control) |
 |
 |
INSTALLATION: Simply connect to the 12V or 24V (secondary) side of your LED power supply (transformer), then connect to the low voltage LED Lighting you wish to dim. Comes with mounting holes on the back of the dimmer, allowing for easy surface mounting on most surfaces.
|
 |
 |
WARRANTY: 1 year limited manufacturer's warranty. |
 |
|
|