 INFO AND SPECS FOR THIS RGB LED CONTROLLER SHOWN BELOW. |
|
|
RUN UP TO 132 FEET OF COLOR CHANGING LED STRIP LIGHT WITH THIS CONTROLLER!
SYNCRONIZE MULTIPLE RGB CONTROLLERS SIMULTANEOUSLY WITH ONE REMOTE!
Advanced Sync™ Series RGB LED Controller (Color Changing), with 20-Key Extended Range Remote for RGB LED Lighting (typically used for our RGB LED SuperChip™ Series Strip / Tape Light). Not for use with Single Color LED lighting or 120V RGB LED lighting. Connects the end of our Low Voltage SuperChip-12™ or SuperChip-24™ Color Changing Lighting to a Low Voltage DC Transformer (will NOT work with AC transformers).
The included 20-Key RGB Remote Control works up to 50 Feet away, and allows you to choose between many different solid colors, solid white, flashing, strobing, adjust brightness, and on/off all from the wireless remote. It has 8 individually selectable Dimmable Static Color Modes, 6 individually selectable Dynamic Color-Changing Modes with Speed, Brightness, Play/Pause and ON/OFF controls. Create bright, dazzling color-changing effects! You can also set the color to stay on one color, as well as set it to 6500K Daylight White.
|
|
|
| ADDITIONAL INFORMATION FOR THIS RGB LED CONTROLLER BELOW |
 |
MAX LED STRIP (TAPE) LIGHT LENGTHS: This RGB LED Controller can handle the max lengths of RGB LED Strip Light as shown below. Please keep in mind that longer runs will require Signal Amplifier(s).
4.4 Watt SuperChip-12™ RGB LED Tape Light: 66 feet of RGB LED Strip (288W Max)
4.4 Watt SuperChip-24™ RGB LED Tape Light: 132 feet of RGB LED Strip (576W Max)
|
|
|
SYNCRONIZATION OPTION: The Synconization option allows you to change and syncronize together multiple controllers with standard CAT5e network cable, and use just one master Remote Control to simultaneously control them all! CAT5e cable not included.
|
|
|
RGB SIGNAL AMPLIFIER: If you plan on running more than 16.5 feet of our SuperChip-12™ or 33 feet of SuperChip-24™ RGB LED Strip Light with this RGB Controller, you must use an RGB Signal Amplifier in between the run.
Click Here to see / order this RGB LED Signal Amplifier! |
|
|
INSTALLATION: Connects to one end of the Color Changing SuperChip-12™ or SuperChip™-24 RGB LED lighting (typically RGB Tape Light), then simply connect it to a low voltage LED DC transformer.
|
|
|
WARRANTY: 1 year limited manufacturer's warranty. |
|
|
|
