 INFO AND SPECS FOR THIS RGB LED CONTROLLER SHOWN BELOW. |
|
|
RUN UP TO 33 FEET OF COLOR CHANGING LED STRIP LIGHT WITH THIS CONTROLLER!
Basic RGB LED Controller (Color Changing), with 44-Key Deluxe Remote for RGB LED Lighting (typically used for our RGB LED SuperChip™ Series Strip / Tape Light). Not for use with Single Color LED lighting or 120V RGB LED lighting. Connects the end of our Low Voltage SuperChip-12™ or SuperChip-24™ Color Changing Lighting to a Low Voltage DC Transformer (will NOT work with AC transformers).
|
The included 24-Key RGB Remote Control (works up to 12 Feet away) allows you to choose between many different solid colors, solid white, flashing, strobing, adjust brightness, and on/off all from the wireless remote. It has 16 static colors and 4 color changing modes. You can also adjust the brightness any static color and increase or decrease the color-changing speed. In addition, you can vary the intensity of each of the three color channels individually to create any possible color and save it as one of 6 DIY keys for ready access. The receiver plugs into the power supply and the multi-color LED light strip. The remote control allows you to choose either 20 pre-set colors, or select from 6 pre-programmed color-changing cycles, along with an auto-cycle. You can also control brightness and the color-change cycle rate. Create bright, dazzling color-changing effects! You can also set the color to stay on one color, as well as set it to 6500K Daylight White.
|
|
|
| ADDITIONAL INFORMATION FOR THIS RGB LED CONTROLLER BELOW |
 |
MAX LED STRIP (TAPE) LIGHT LENGTHS: This RGB LED Controller can handle the max lengths of RGB LED Strip Light as shown below. Please keep in mind that longer runs will require Signal Amplifier(s).
4.4 Watt SuperChip-12™ RGB LED Tape Light: 16.5 feet of RGB LED Strip (72W Max)
4.4 Watt SuperChip-24™ RGB LED Tape Light: 33 feet of RGB LED Strip (144W Max)
|
|
|
DIMENSIONS:
1.97" Length x 1.34" Width x 0.87" Thick (RGB LED Controller Box)
4.92" Length x 2.05" Width x 0.24" Thick (44-Key Remote Control) |
|
|
RGB SIGNAL AMPLIFIER: If you plan on running more than 16.5 feet of our SuperChip-12™ or 33 feet of SuperChip-24™ RGB LED Strip Light with this RGB Controller, you must use an RGB Signal Amplifier in between the run.
Click Here to see / order this RGB LED Signal Amplifier! |
|
|
INSTALLATION: Connects to one end of the Color Changing SuperChip-12™ or SuperChip™-24 RGB LED lighting (typically RGB Tape Light), then simply connect it to a low voltage LED DC transformer.
|
|
|
WARRANTY: 1 year limited manufacturer's warranty. |
|
|
|
