SCROLL DOWN TO SEE ALL INFORMATION AND SPECIFICATIONS FOR THIS FIXTURE! |
|
|
REPLACES 120W INCANDESCENT USING ONLY 13 WATTS OF POWER! DIMMABLE!
INTEGRATED LED BOARD = EVEN, SMOOTH LIGHT! INSTANT ON FULL BRIGHTNESS!
INCREDIBLE EFFICIENCY AT 100 LUMENS PER WATT WITH 90 CRI HIGH DEFINITION!
11″ Diameter 13 Watt LED 120VAC Line Voltage Premium Specification Grade Deco Alabaster Series Flush Mount Fixture. This flush mount LED fixture is equivalent to a 120 watt Incandescent light source while consuming 88% less electricity versus Incandescent! Light output is a whopping 1300 Lumens! Rated at 50,000+ hours, you’ll never change another bulb again! Just install these LED flush mounts on your ceiling and forget about them for AT LEAST 10-20+ years!
FINISH:
This LED fixture comes as shown in an Antique Bronze Finish with a semi clear ribbed Alabaster style glass lens diffuser. We also have this LED fixture available in a Brushed Nickel finish.
FULLY INTEGRATED LED:
This LED flush mount fixture includes a fully integrated LED array system specifically engineered for this light! Unlike some of the non-integrated CFL fixtures that are simply retrofitted with LED bulbs, this led fixture was designed for LED from the ground up! This allows for maximum usable lumen output and 100% even, no “hot spots” lighting!
LIGHT COLOR OUTPUTS AVAILABLE:
This LED flush mount fixture is available in your choice of 4000K pure white or 5000K daylight white. 4000K pure white gives off a close to pure white light similar to most CFL lighting, and is ideal for residential, office or hospitality use. 5000K daylight gives off a bright white light with a slight bluish tinge, similar to outside daylight, making it ideal for commercial applications or for those that want that cool bluish-white look. See the light color chart below for light output color examples.
LIGHT DISTRIBUTION:
Light Distribution from this LED flush mount fixture puts out a full omni-directional, even light, and aims all light down at a 150° beam angle and 360° around! With this LED flush mount, all usable lumens go where they’re supposed to, down (out) from the light and to the sides! No more unseen “wasted” lumens shooting up!
DIMMING:
This LED flush mount ceiling fixture is fully dimmable with most line voltage Triac compatible dimmers, i.e. most incandescent dimmers out there! |
|
LIGHT OUTPUT, LIGHT COLOR OPTIONS AND DIMENSIONS DIAGRAM SHOWN BELOW.
|
|
|
|
|
|
ADDITIONAL SPECIFICATIONS FOR THIS 120V LED FLUSH MOUNT FIXTURE BELOW |
|
INPUT VOLTAGE: 120 Volt AC Line Voltage.
|
|
|
CRI: >90! The higher the CRI (Color Rendering Index) rating, the better! CRI represents the amount of the spectrum used in the light output, i.e. the higher the value, the better the color clarity you will see from the light! You will SEE the difference!
|
|
|
DIMMING: This LED flush mount ceiling fixture is fully dimmable with most line voltage Triac compatible dimmers, i.e. most incandescent dimmers out there!
|
|
|
LIGHT DISTRIBUTION (OPTICS): Light Distribution from this LED flush mount fixture is puts out a full omni-directional, even light, and aims all light down at a 150° beam angle and 360° around! With this LED flush mount, all usable lumens go where they’re supposed to, down (out) from the light and to the sides! No more unseen “wasted” lumens shooting up!
|
|
|
LED’S USED: Uses premium grade SMD LED’s evenly spread throughout the fixture to ensure smooth, powerful and even light output!
|
|
|
LED USEFUL LIFE: 50,000+ Hours, meaning if you were to use these fixtures for 8 hours per day, 365 days per year, these LED fixtures will last you over 17 YEARS! To put this into perspective, if you were to run this fixture 24 hours a day, 365 days per year, it would stay lit for nearly 6 years!!!
|
|
|
LIGHT COLOR OUTPUT: This LED flush mount fixture is available in your choice of 4000K pure white or 5000K daylight white. 4000K pure white gives off a close to pure white light similar to most CFL lighting, and is ideal for residential, office or hospitality use. 5000K daylight gives off a bright white light with a slight bluish tinge, similar to outside daylight, making it ideal for commercial applications or for those that want that cool bluish-white look. See the light color chart above for light output color examples.
|
|
|
ACTUAL LUMENS: 1300 Lumens (rated at the source).
|
|
|
EFFICIENCY: 100 Lumens Per Watt! (rated at the source).
|
|
|
INSTALLATION: Simply mount flush over your junction box (not supplied), run your romex wiring, and you’re good to go!
|
|
|
LISTINGS & CERTIFICATIONS: ETL Listed for dry or damp locations, California Title 24 Compliant, CE, RoHS, FCC |
|
|
WARRANTY: Five (5) year manufacturer’s warranty from date of delivery. |
|
|
ESTIMATED ENERGY COSTS OF USING A 120 WATT INCANDESCENT LIGHT SOURCE – 10 YEAR PERIOD:
$700.80* per fixture
|
|
|
ESTIMATED ENERGY COSTS OF USING THIS 13 WATT LED LIGHT SOURCE – 10 YEAR PERIOD:
$75.92* per fixture
|
|
|
ESTIMATED ENERGY COST SAVINGS USING THIS LED LIGHT SOURCE – 10 YEAR PERIOD: $624.88* Not including any potential rebates by your local power company! *Savings estimate assumes that the fixtures are running 8 hours per day, 365 days per year at a rate $0.20 Per KWh. Your actual savings will vary based on amount of use and KWh pricing in your area.
|
|
|
|