 SCROLL DOWN TO SEE ALL INFORMATION AND SPECIFICATIONS FOR THIS FIXTURE! |
|
|
REPLACES 100W INCANDESCENT USING ONLY 15 WATTS OF POWER! DIMMABLE!
INTEGRATED LED BOARD = EVEN, SMOOTH LIGHT! INSTANT ON FULL BRIGHTNESS!
7.4″ Diameter 15 Watt LED 120VAC Line Voltage Premium Specification Grade Faux Recessed Series Flush Mount Fixture. This flush mount LED fixture is compact, slim, and can be installed almost anywere! This LED fixture is equivalent to a 100 watt Incandescent light source while consuming 85% less electricity versus Incandescent! Light output is a whopping 1095 Lumens! Rated at 50,000+ hours, you’ll never change another bulb again! Just install these LED flush mounts on your ceiling or wall forget about them for AT LEAST 10-20+ years!
INSTALLS ON A JUNCTION BOX OR ANY HALO COMPATIBLE 6″ RECESSED HOUSING!:
Whether you want to install this as a flush mount over a Junction Box, or use it as a 6″ Recessed lighting LED retrofit kit by simply removing your old 6″ trim and bulb, then just simply “popping” this LED fixture in the same way you would install a 6″ trim! If installing on a 6″ 120V housing, order this with the optional socket adapter!
FINISH OPTIONS:
This LED fixture is available in your choice of White, Brushed Nickel or Antique Bronze Finish. See the high resolution link above to see each finish option in detail!
FULLY INTEGRATED LED:
This LED flush mount fixture includes a fully integrated LED array system specifically engineered for this light! Unlike some of the non-integrated CFL fixtures that are simply retrofitted with LED bulbs, this led fixture was designed for LED from the ground up! This allows for maximum usable lumen output and 100% even, no “hot spots” lighting!
LIGHT COLOR OUTPUTS AVAILABLE:
This LED flush mount fixture is available in your choice of 3000K warm white or 4000K pure white. 3000K warm white gives off a yellowish-white appearance similar to Incandescent or Halogen, and 4000K pure white gives off a close to pure white light similar to most CFL lighting. 3000K is ideal for residential applications, while 4000K is ideal for commercial, retail, hospitality, or office applications. See the light color chart below for light output color examples.
LIGHT DISTRIBUTION:
Light Distribution from this LED flush mount fixture puts out a full omni-directional, even light, and aims all light down at a 150° beam angle and 360° around! With this LED flush mount, all usable lumens go where they’re supposed to, down (out) from the light and to the sides! No more unseen “wasted” lumens shooting up!
DIMMING:
This LED flush mount ceiling fixture is fully dimmable with most line voltage Triac compatible dimmers, i.e. most incandescent dimmers out there! |
|
|
LIGHT OUTPUT, LIGHT COLOR OPTIONS AND DIMENSIONS DIAGRAM SHOWN BELOW.
|
|
|
|
|
|
|
|
|
|
| ADDITIONAL SPECIFICATIONS FOR THIS 120V LED FLUSH MOUNT FIXTURE BELOW |
|
 |
CONSTRUCTION / FINISH OPTIONS: Die-formed, cold rolled steel in your choice of White, Brushed Nickel or Antique Bronze finish with a durable, milky white acrylic diffuser. Diffuser provides widespread, even illumination. |
|
|
LED WATTAGE: 15 Watts.
|
|
|
EQUIVALENT TO: 100 Watts Incandescent or Halogen. |
|
|
DIMENSIONS: 7.4″ (188 mm) Diameter x 1.26″ (32 mm) Height.
|
|
INPUT VOLTAGE: 120 Volt AC Line Voltage.
|
|
|
CRI: >82. The higher the CRI (Color Rendering Index) rating, the better! CRI represents the amount of the spectrum used in the light output, i.e. the higher the value, the better the color clarity you will see from the light! You will SEE the difference!
|
|
|
DIMMING: This LED flush mount ceiling fixture is fully dimmable with most line voltage Triac compatible dimmers, i.e. most incandescent dimmers out there!
|
|
|
LIGHT DISTRIBUTION (OPTICS): Light Distribution from this LED flush mount fixture puts out a full omni-directional, even light, and aims all light down at a 150° beam angle and 360° around! With this LED flush mount, all usable lumens go where they’re supposed to, down (out) from the light and to the sides! No more unseen “wasted” lumens shooting up!
|
|
|
LED’S USED: Uses premium grade SMD LED’s evenly spread throughout the fixture to ensure smooth, powerful and even light output!
|
|
|
LED USEFUL LIFE: 50,000+ Hours, meaning if you were to use these fixtures for 8 hours per day, 365 days per year, these LED fixtures will last you over 17 YEARS! To put this into perspective, if you were to run this fixture 24 hours a day, 365 days per year, it would stay lit for nearly 6 years!!!
|
|
|
LIGHT COLOR OUTPUT: This LED flush mount fixture is available in your choice of 3000K warm white or 4000K pure white. 3000K warm white gives off a yellowish-white appearance similar to Incandescent or Halogen, and 4000K pure white gives off a close to pure white light similar to most CFL lighting. 3000K is ideal for residential applications, while 4000K is ideal for commercial, retail, hospitality, or office applications. See the light color chart above for light output color examples.
|
|
|
ACTUAL LUMENS: 1095 Lumens (rated at the source).
|
|
|
EFFICIENCY: 73 Lumens Per Watt (rated at the source).
|
|
|
PUPIL LUMENS: 2080 Lumens (what your eyes see).
|
|
|
INSTALLATION: Whether you want to install this as a flush mount over a Junction Box, or use it as a 6″ Recessed lighting LED retrofit kit by simply removing your old 6″ trim and bulb, then just simply “popping” this LED fixture in the same way you would install a 6″ trim! If installing on a 6″ 120V housing, order this with the optional socket adapter! Can be used on ceilings or walls.
|
|
|
LISTINGS & CERTIFICATIONS: ETL Listed for dry or damp locations, Energy Star Rated, California Title 24 Compliant, CE, RoHS, FCC |
|
|
WARRANTY: Five (5) year manufacturer’s warranty from date of delivery. |
|
|
ESTIMATED ENERGY COSTS OF USING A 100 WATT INCANDESCENT LIGHT SOURCE – 10 YEAR PERIOD:
$584.00* per fixture
|
|
|
ESTIMATED ENERGY COSTS OF USING THIS 15 WATT LED LIGHT SOURCE – 10 YEAR PERIOD:
$87.60* per fixture
|
|
|
ESTIMATED ENERGY COST SAVINGS USING THIS LED LIGHT SOURCE – 10 YEAR PERIOD: $496.40* Not including any potential rebates by your local power company! *Savings estimate assumes that the fixtures are running 8 hours per day, 365 days per year at a rate $0.20 Per KWh. Your actual savings will vary based on amount of use and KWh pricing in your area.
|
|
|
|
Reviews
There are no reviews yet.