120V 4.5 Watt / Foot Color-Changing – 164 Feet

High Brightness, fully flexible 164 Foot Length of 4.5 Watts per foot Linear “Brightest” 5050 SMD Driverless Series 120 Volt AC Line Voltage RGB Color-Changing LED “Tape” Strip Light. Each 164 Foot 120V LED RGB Strip Light Spool comes included with an end cap. Power Cord is connected to the controller you choose, i.e. the 120V RGB LED “Tape” Strip Light first connects to a 120V RGB controller. RGB controller is required and NOT included, please see our controller options below. Once connected to the RGB controller, the controller connects directly to 120VAC line voltage. NO TRANSFORMER REQUIRED! Just plug in the power cord at the end of the controller (or hardwire it to a switch) to standard line voltage connection and you’re ready to go! This LED 120V RGB Driverless Strip Light can do a multitude of color-changing effects, including solid colors, etc. depending on the RGB controller used (see below). This RGB LED Tape Light can also do Daylight Cool White (6500K) when desired!

Enjoy virtually unlimited uses for this RGB LED Strip light, it is fully flexible, thin (only 0.26″ thick x 0.48″ Wide!), produces a very even light (little to no “hot spots” unlike Rope Light), consumes just 4.5 Watts per foot, and installs just about anywhere with ease (see our 120V LED “Tape” Strip Light Accessories)! This LED Linear “Tape” Strip Light is warrantied for Three (3) Years.

FEATURES & BENEFITS: 120V Line Voltage = no transformer; Up to 520 Feet* (158 Meters*) on a single run! Long life span of over 50,000 hours; Flexible & slim, field cuttable every 1/2 Meter (approx. 19.7″), Easy installation onto most surfaces; Produces even color between strips at the tightest color tolerances; Little to no heat generation makes it ideal for heat-sensitive areas; No UV light output.

RECOMMENDED APPLICATIONS: Decorative lighting (cove lighting, back lighting) for homes, hotels, stores, yachts, bars, automobiles etc.; Guidance Lighting for cinemas, theatres, yachts , trains to guide people move around safely; Sign Lighting; Channel letter lighting for your stores, restaurants, bars etc.; The possibilities are nearly endless!

BELOW PHOTOS SHOW RGB LED STRIP LIGHT IN ACTION! CLICK ANY PHOTO TO ENLARGE!

ADDITIONAL SPECIFICATIONS FOR THIS 120V RGB LED FLEXIBLE STRIP LIGHT BELOW

LENGTH OF 120V TAPE SPOOL: 50 Meters (approx. 164 feet), Field cuttable every 19.7″ (0.5 meters), 120v tape strip light is marked at every cutting length. Although you may cut it if you wish, if you do so please note that cutting it will void the warranty. DIMENSIONS OF TAPE: 164 Feet Long (50 Meters) x 0.48″ (12.2 mm) Wide x 0.26″ (6.6 mm) Thick LED CHIPS USED: SMD 5050 RGB 3-in-1 LED’s # OF LED’S: 3000 LED’s per 164′ Length (Approximately 18 LED’s per foot) RGB CONTROL: RGB Controller Box Required but not included. Please see above options to select an RGB Controller Box that meets your needs. VOLTAGE: 120 Volt AC – No transformer needed! POWER CONSUMPTION: 720 Watts total for the entire 164 foot spool (Approximately 4.5 Watts Per Foot). Total length of spool pulls 6.0 Amps. You can easily run the entire 164 foot length on one power cord if desired. MAX RUN: Up to 520 feet depending on the Amperage rating of the RGB Controller you are using, as well as the Amperage load on the curcuit breaker you are connecting it to. DIMMABILITY: Fully Dimmable with all but the “Basic” controllers above MOUNTING: We offer Mounting Clips with screws for surface mounting on almost any surface, and recommend a minimum of Two (two) Mounting Clips for every 3.28 feet of 120V Tape Light if you go with this option. We also offer 3 foot long Mounting Channels, allowing you to cleanly mount straight runs. See our 120V LED Tape Light Accessories on the previous page for more information. LUMENS (ENTIRE 164′ SPOOL): 41,300 Lumens when light color is set to Cool White (6500K). Lumens will vary greatly depending on the color output. LUMENS (PER FOOT): 252 Lm/Foot when light color is set to Cool White (6500K). Lumens will vary greatly depending on the color output. BEAM ANGLE (SPREAD): 120° MATERIAL: Commercial Grade LED Strip utilizing high grade 5050 RGB 3-in-1 SMD LED Chips, Fully Flexible and Durable. USE: Comes Standard for indoor dry location use only. IP68 Outdoor Wet location optional, add $50.00. WARRANTY: Three (3) year limited manufacturer’s warranty from date of delivery. Warranty void if Strip is cut.

GO BACK – CLICK HERE KEEP SHOPPING – CLICK HERE