 YOU ASKED FOR IT AND IT’S FINALLY HERE! 2″ LED SQUARE DECO RECESSED LIGHTING! |
SCROLL DOWN TO SEE ALL INFORMATION AND SPECIFICATIONS FOR THIS LED RETROFIT MODULE!
|
|
|
HIGH PERFORMANCE FOR AN UNBELIEVEABLE PRICE! MEETS NEWEST CA TITLE 24 REQUIREMENTS!
2″ 120V / 12V Square Baffle Deco Series LED Recessed Retrofit Kit. Comes with everything you need for an EZ install into our 2″ LED ready housings or your existing 2″ 120V or 12V Halo-Compatible Recessed Housing. These will fit in almost ANY 2″ housing out there! Comes in a 3000K Warm White, which mimics halogen light. Dimmable from 100% down to 5% with most dimmers! This LED Retrofit kit comes with a full Five (5) year manufacturer’s warranty. Go Smart, Go LED! Please see below for installation instructions if installing in a 2″ 12V Low Voltage Housing!
|
|
|
|
SEE THE DIFFERENCE! HIGHER CRI = BETTER LIGHT!
|
|
|
| ADDITIONAL FEATURES AND SPECIFICATIONS FOR THIS 2″ LED RETROFIT KIT |
|
 |
MATERIAL: Extruded Cast Aluminum construction with stepped baffle trim powdercoated in a white finish. Constructed with premium heavy duty aluminum heatsinks. Trim includes a lens diffuser. Unlike many of the cheap units you might find at Home Depot, Lowe’s etc., this Retrofit Kit is all metal!
|
|
|
VOLTAGE: 120VAC. Can operate in 12V Low Voltage housings, just simply bypass the housing’s transformer!
|
|
BEAM ANGLE: 40° Beam Angle offers a semi-narrow flood, replicating typical halogen MR16 lighting.
|
|
CRI: >93! These LED retrofit kits meet the newest California Title 24 Requirements, and are great for applications such as Retail Lighting where high quality light is desirable!
|
|
|
DIMMING: Fully Dimmable from 100% – 5% with almost any 120VAC Triac Compatible Dimmer!
|
|
|
COMPATIBILITY: Compatible with almost all (99%) of the standard 2″ housings (Halo, Capri, Juno, Commercial Electric, Utilitech, etc). If you are unsure if your housing is compatible, call us and we will confirm it for you!
|
|
|
INSTALLATION: Installs in minutes and easily “pops” into our LED ready housings or your existing housing. Torsion springs supplied for convenient mounting to existing remodel or new construction 2″ 120v housings. For California Title 24 “No Edison socket” compliance, simply cut off the screw base from the retrofit kit, cut off the socket from the housing to expose the wires. If installing into a 12v Low Voltage housing, make sure you 1) Bypass the 12v low voltage transformer on the housing, 2) cut off the socket in the housing to expose the wires, 3) cut off the connector end on the LED retrofit kit, 4) splice the retrofit kit to the cut wires on the housing. (MAKE SURE YOUR POWER IS OFF TO PREVENT INJURY), and simply splice them together!
|
|
|
ESTIMATED ENERGY COSTS USING A 75 WATT HALOGEN SOURCE – 10 YEAR PERIOD:
$438.00* per unit
|
|
|
ESTIMATED ENERGY COSTS USING THIS 9 WATT LED SOURCE – 10 YEAR PERIOD:
$52.55* per unit
|
|
|
ESTIMATED COST SAVINGS – 10 YEAR PERIOD: $385.45* Not including any rebates by your local power company! *Estimate assumes lights will be running 8 hours per day, 365 days a year @ $0.20 Per KWh. Savings will vary based on amount of use and KWh pricing in your area.
|
|
|
CERTIFICATIONS: UL Listed for dry, damp or wet location, Energy Star Rated, California Title 24 Compliant, CE & RoHS compliant.
|
|
|
WARRANTY: 5 Year manufacturer’s warranty from date of delivery against any defects.
|
|
|
|
|
