 ADDITIONAL SPECIFICATIONS FOR THIS 4″ MCCT BAFFLE SERIES LED RETROFIT |
|
 |
MATERIAL: Extruded Cast Aluminum housing, premium heavy duty aluminum heatsinks, metal baffle, metal trim ring, and frosted lens diffuser lens. Unlike many of the cheap units you might find at Home Depot, Lowe’s etc., this Retrofit Kit is all metal including the reflector trim!
|
|
|
VOLTAGE: 120VAC. Can operate in 12V Low Voltage housings, just simply bypass the housing’s transformer!
|
|
BEAM ANGLE: 90° Beam Angle mimics typical incandescent & halogen flood bulbs. Please see spec sheet (link above) for photometrics
|
|
|
LIGHT COLOR OUTPUTS: Each light can toggle between 3000K Warm White (mimics warm halogen), 4000K Pure White (mimics fluorescent, or a pure white light) and 5000K Cool White (used mainly in commercial or art deco settings, and gives off a bluish-white light).
|
|
|
CRI: >90! The higher the CRI (Color Rendering Index) rating, the better! CRI represents the amount of the spectrum used in the light output, i.e. the higher the value, the better the color clarity you will see from the light! LED doesn’t just save you money in energy costs, but it gives you a BETTER light versus Fluorescent. You will SEE the difference!
|
|
|
DIMMING: Fully Dimmable from 100% – 5% with almost any standard 120VAC Triac Compatible Dimmers.
|
|
|
COMPATIBILITY: Compatible with almost all (99%) of the standard 4″ housings (Halo, Capri, Juno, Commercial Electric, Utilitech, etc). If you are unsure if your housing is compatible, call us and we will confirm it for you!
|
|
|
INSTALLATION: Installs in minutes and easily “pops” into your existing housing. Torsion springs supplied for convenient mounting to existing remodel or new construction 4″ 120v housings. If ordered in 277V or 347V, an external driver is included, which you simply place in between the retrofit kit and the romex wire leading to the retrofit kit. Includes E26 Medium Screw-in Base Adapter. For California Title 24 “No Edison socket” compliance, simply cut off the screw base from the retrofit kit, cut off the socket from the housing to expose the wires. If installing into a 12v Low Voltage housing, make sure you 1) Bypass the 12v low voltage transformer on the housing, 2) cut off the socket in the housing to expose the wires, 3) cut off the connector end on the LED retrofit kit, 4) splice the retrofit kit to the cut wires on the housing. (MAKE SURE YOUR POWER IS OFF TO PREVENT INJURY), and simply splice them together!
|
|
|
ESTIMATED ANNUAL ENERGY COSTS USING A 65 WATT INCANDESCENT RECESSED LIGHT:
$37.95* per light
|
|
|
ESTIMATED ANNUAL ENERGY COSTS USING THIS 8 WATT LED RECESSED LIGHT:
$4.67* per light
|
|
|
ESTIMATED ANNUAL ENERGY COST SAVINGS USING LED: $33.28* Not including any rebates by your local power company! *Estimate assumes lights will be running 8 hours per day, 365 days a year @ $0.20 Per KWh. Savings will vary based on amount of use and KWh pricing in your area.
|
|
|
CERTIFICATIONS: ETL Listed for dry or damp location (IP40, not suited for Wet Location), Energy Star Rated, California Title 24 Approved, JA-8 Compliant, CE & RoHS compliant.
|
|
|
WARRANTY: 5 Year manufacturer’s warranty from date of delivery against any defects.
|
|
|
|
|
